In this section

National Certificate in Industrial Measurement and Control (Level 4) * Modules

TE0901

Programme Regulations

These regulations should be read in conjunction with the Institute's Academic Regulations, clause 2 General Programme Regulations.

Schedule of Modules

Group A
Off-Job Modules (The Skills Organisation)

Module Code
Module Title
Pre-requisites
Credits
Level
TEMCI3101 IMC Level 3 (ITO Distance Learning)253
TEMCI3102 IMC Level 3 (ITO Block Course)TEMCI3101 263
TEMCI3103 IMC Core Electronics (ITO Distance Learning)113
TEMCI3104 IMC Core Electronics (ITO Block course)TEMCI3103 293
TEMCI4101 IMC Level 4 (ITO Distance Learning)214
TEMCI4102 IMC Level 4 (ITO Block Course)TEMCI4101 244
TEMC2101 Write a short report (ITO Distance Learning)32

Group B
Off-Job Modules (MOE)

Module Code
Module Title
Pre-requisites
Credits
Level
TEMCI3201 IMC Level 3 (ITO Distance Learning)253
TEMCI3202 IMC Level 3 (ITO Block Course)TEMCI3201 263
TEMCI3203 IMC Core Electronics (ITO Distance Learning)
11
3
TEMCI3204 IMC Core Electronics (ITO Block course)TEMCI3203 293
TEMCI4201 IMC Level 4 (ITO Distance Learning)214
TEMCI4202 IMC Level 4 (ITO Block Course)TEMCI4201 244
TEMC2201 Write a short report (ITO Distance Learning)32

Group C
On-Job Compulsary Modules

To complete these on-job unit standards, candidates will need to be employed or gain employment in a position with industrial measurement and control responsibilities in an industrial context.

Module Code
Module Title
Pre-requisites
Credits
Level
TE01178A Follow safe practices in an electrical workplace32
TE17602AHazard identification and risk assessment43
TE02631A Maintain pressure measurement devices
*
103
TE02633AMaintain level measurement devices in industry*103
TE02635A Temperature measurement devices used in industry*103
TE02637A Maintain flow measurement devices used in industry*103
TE02640A Maintain control valve actuators and positioners
*
53
TE02667AInstall and service pneumatic or electro-peneumatic*53
TE02357ATune or adjust a plant control loop*24
TE09180AInstall, replace, test, commission instrumentation*104

Group D
On-Job Elective Modules

Module Code
Module Title
Pre-requisites
Credits
Level
TE02639AMaintain and service control valves
*
103
TE02642AMaintain pH measuring system for chemical analysis*44
TE02643AMaintain a conductivity measuring system*44
TE02644AMaintain a dissolved oxygen measuring system*44
TE02645AMaintain a consistency or viscosity measuring system*44
TE02646AMaintain analytical monitoring equipment*44
TE02647AMaintain humidity or dewpoint monitoring equipment
*
44
TE02648AMaintain & calibrate density monitoring equipment
*
44
TE02657AMaintain pneumatic controllers
*
54
TE02664AMaintain hydraulic or electro-hydraulic equipment
*
33
TE24356AMaintain chromatograph
*
44
TE24884AMaintain conditioning modules and controllers
*
6
4

* have recommended pre-requisites